reset philips hue

While the Philips Hue smart lights are some of the most reliable and intuitive we've had the pleasure of using, there might well exist occasions when you lot demand to reset them.

Possibly something in the smart home chain is playing upwardly, perchance you want to requite your Hue system to a friend, or maybe you just want to outset your smart domicile configuration again from scratch.

Whether you have a standard Philips Hue bulb or span, or a Philips Hue Bluetooth bulb, the good news is that resetting Philips Hue smart bulbs is straightforward, and shouldn't have y'all long to practise.

Whether you're resetting a single bulb or a whole system, hither'south how to become about information technology.

Learn nearly Philips Hue

• Learn: How to connect and set up Philips Hue
• Do more: Philips Hue sync explained
• Go further: Best Philips Hue apps

Reset a Philips Hue bulb

If yous're dealing with a single Philips Hue seedling or standalone lamp, and you lot want to reset this on its own, you lot demand to go through the Hue app for Android or iOS — which is most likely how you gear up the bulb in the first identify.

From the chief screen of the app, tap 'Settings' (bottom right corner), and choose 'Lights'.

Tap on the lite you desire to reset, and then tap 'Delete'. The device gets forgotten by the app and is prepare to be added once more or used in a completely different system.

If you're non using the Hue Bridge and Hue app, check inside the app you are using.

For instance, Hue bulbs can be removed from an Echo Plus, or other Zigbee-enabled Repeat smart speakers, and reset by tapping on 'Devices' in the Alexa app; choose the room grouping, then the bulb, then the settings cog (top-right), then the trash icon (top-right again).

Bulbs can also be reset if y'all have an official Philips Hue Dimmer Switch at home. With the calorie-free in question turned on, hold the Dimmer Switch shut to it and hold down the On and Off buttons together for 10 seconds or then.

When the lite blinks and then stops blinking, the bulb is reset.

Reset a Philips Hue Bridge

For a more than comprehensive reset, you can return your Hue Span to its factory settings – this will reset all the lamps and bulbs on your organisation at the aforementioned time. The Hue Bridge and any lights will then need to exist set upwards once again from scratch, the same way you did when y'all get-go bought them.

There's not much to the process hither: turn your Hue Span over and you should notice a 'restore factory settings' push button, as pictured to a higher place. Hold this downward for a few seconds and your entire system gets reset; you lot're going to need a paperclip or some other minor, thin object to poke down the hole next to the characterization.

• Essential guide: How to set up Hue without a Bridge

Annotation that the official Philips Hue support documents only recommend resetting a system if y'all're told to by a customer service counselor — it's not something to exercise lightly. Depending on your setup, yous may need to enter the series numbers of your Hue bulbs to add them once again after a reset.

Remember that resetting your Hue Bridge ways all your lights and accessories are forgotten on the network. Y'all'll lose your preferences, lite groupings, scenes, routines, widgets, and and then on. It really is a last-resort pick.

Reconfigure your Philips Hue network

Whenever possible, it'south all-time to try and avoid resetting your Philips Hue bulbs and the Philips Hue Span.

Brand sure you've explored all the other troubleshooting options bachelor to practise earlier deleting lights from the organisation or triggering the mill reset button on the Hue Bridge.

If you lot only desire to reconfigure your bulbs or assign them to different rooms, for example, this can be hands done inside the Hue app. Tap through into a specific room, tap the carte du jour push button (three dots, elevation-right), and y'all can add new lights or rename the ones you've got.

Choose 'Edit Room' or 'Rearrange scenes and lights' the app lets you switch your lights effectually: bulbs and lamps tin be added to or removed from the electric current room, and you can rename it too. If you've moved your Hue Go upstairs (or downstairs), this is the fashion to alter your Hue setup without resetting anything.

The same goes for third-party apps and platforms, though yous might need to cheque the official back up documents for details.

If y'all've added Philips Hue to a Google Home network, for instance, head into the Google Habitation app on your phone—tap through to a bulb, then tap the cog icon to unlink your Hue lights from the Google Dwelling house network.

Source: https://www.the-ambient.com/how-to/reset-philips-hue-1565

Share this post